سؤال قراءة ستيب محلول — فهم التفاصيل (تدريب 7999)

1) The unwanted poisonous by-products of human activity, toxic wastes can arise from many sources. Atmospheric pollution, for example, is caused by automobiles, power plants, and incinerators. Acid rain is produced when oxides of sulfur, carbon, and nitrogen from burning fossil fuels combine with moisture in the air, producing hazardous acids. Discarded industrial solvents include low-molecular weight material such as benzene and carbon tetrachloride and high-molecular weight organic materials such as PCBs (polychlorinated biphenyls). which were used in the past for hydraulic fluids and in electrical transformers and capacitors. Dioxins are the wanted by-products of the manufacture of herbicides. Heavy-metal residues from copper or silver mining can contaminate groundwater or streams and Iakes and become concentrated in fish. Radioactive wastes are generated by nuclear power reactors, the manufacture of nuclear weapons, and, at low levels, by the industrial and medical application of radioisotopes. 2) In 1981 approximately 264 million tons of waste were produced in the United States—about 55 million tons were considered hazardous. During 1986 the United States generated about 1,770,000 cubic feet (50,000 cubic meters) of low-level solid and liquid radioactive waste. 3) Many toxic wastes can harm humans, animals, or plants. Significant exposure to lead in paints and gasoline can lead to nervous disorders. Organic toxic wastes can lead to liver and kidney inflammation. Others, such as PCBs, are suspected of causing birth defects. Some organic materials, such as benzene, are known to cause cancer in laboratory animals and are listed as possible cancer-producing agents in humans. Moderately high levels of copper, silver, and other heavy metals are detrimental to the growth of algae. 4) Some toxic wastes cause ecological imbalances. The insecticide DDT (dichlorobiphenyl trichloroethane), for example, almost wiped out the American bald eagle population and reduced many other bird populations. It destroyed the birds' ability to develop a sufficiently strong egg shell to assure hatching. Because of DDT's threat to bird populations severe restrictions were imposed in 1972 on its use in the United States. Other laws required the reduction of lead in gasoline and the termination of PCB production. DDT is still used in developing countries for its effectiveness against the malaria-carrying mosquito. 5) Depending on the type of waste, toxic wastes can be treated chemically, biologically, or by combustion. (See also garbage and refuse disposal.) An acid spill, for example, may be treated with lime or bicarbonate to neutralize the acid. Oil spills at sea are often treated with an emulsifier to disperse the oil in the water, thereby reducing the adverse effects on beaches and on wildlife. Effective methods of biological treatment of toxic wastes are still undergoing development. Organisms that can survive the toxicity and degrade the toxic wastes in a reasonable amount of time have not been found, but advances in genetic engineering may change this situation. 6) Combustion and other high-temperature treatments are the major methods used to reduce the toxicity of wastes. Processes involving plasma technology are used for specific toxic wastes. These processes use high temperatures to ionize a mixture of air and fuel gases. When combined with these ionized gases, hot toxic gases from the waste are decomposed into relatively harmless components. Plasma treatment at temperatures above 1,650° F (900° C) can diminish the toxicity of gas emissions such as dioxin vapor by about ten times the reduction that results from conventional combustion treatments. 7) Incineration of liquid wastes is the primary method of toxic waste treatment in the United States. It usually involves injecting the waste as small droplets into a burner. A fixed-hearth process, by which both liquid and solid wastes can be handled, is also used. The waste is treated in two stages. It is first partially burned with insufficient air and then burned again with excess air at higher temperatures to destroy the gases released during the first stage. 8) Another widely used process involves incineration in a rotary kiln. This is used for solids, liquids, their mixtures (slurries), and wastes in containers. Some hazardous wastes are disposed of directly as fuel in industrial boilers or cement kilns. 9) Liquid toxic wastes must be stored temporarily before disposal. Steel drums are used for short-term storage. Materials less subject to corrosion, such as glass or ceramic, are often required for long-term storage. Ocean dumping and the use of landfills are no longer permitted for the disposal of hazardous waste in the United States. 10) In the United States high-level nuclear wastes containing plutonium or uranium are either sent to reprocessing plants or stored near the nuclear facility site until disposal. Vitrification, a disposal procedure developed in recent years, is a process that embeds nuclear wastes in glasslike substances that are stable for thousands of years. These erosion-resistant blocks are then stored in underground salt mines or stable rock formations. Vitrification has been highly developed in France where nuclear energy is used extensively for electricity production. In the United States low level radioactive wastes are currently stored at sites in three states—South Carolina, Nevada, and Washington—often after considerable volume reduction by compacting. Some low-level radioactive wastes are also incinerated. In the United States performance standards and permit requirements for thermal toxic waste destruction are determined by the Environmental Protection Agency (EPA). Current incinerator standards require the removal of at least 9999 percent of the principal organic hazardous constituents and 99 percent of the hydrogen chloride in exhaust gases. Separate standards apply to solid particles (dust and ash) emitted during incineration. Radioactive wastes are regulated by the EPA, the Department of Energy (DOE), and the Nuclear Regulatory Commission (NRC). Each state is responsible for its own waste and interstate cooperation regarding disposal facilities is encouraged. Toxic waste regulation in Canada is monitored by the Ministry of the Environment, while the Atomic Energy Control Board manages radioactive waste.